Projects[Sort by categories]
Design – Conceptional Studies & FEED
PCPP / MMC Oil & Gas Engineering SDN. BHD.
D1 Cluster Development
Wellhead Support Frames (WHSF)
ICON Engineering was contracted by PCPP via MMC O&G to provide conceptual engineering and detailed structural design of two wellhead support frames (WHSF) at D30 and DANA fields that are part of the D1 cluster fields being developed by PCPP.
PCPP Joint Operating Company consists of Petronas Carigali, Pertamina and Petrovietnam and is undertaking the development of D1 cluster fields comprising of D30, Dana, Danau and Darma located offshore Sarawak, Malaysia.
Roc Oil Ltd
Dongara, Western Australia
Cliff Head Project Platform Installation
ICON Engineering was commissioned to install, hookup and commission the wellhead platform and topsides by Roc Oil for the Cliff Head project in Australia. The jacket and topsides were fabricated in Malaysia and transported to site on a dedicated barge. The jacket was loaded out and transported vertically.
ICON was responsible for seafastening design, naval architecture and preparation of the tow plan.
ENI (Australia) Ltd
Woolybutt Field Development
Scalybutt – 1 Tieback Project
ENI contracted ICON Engineering to undertake the fast track Project Management and Design Engineering for the Scalybutt Tie back Project.
A subsea manifold was also designed and installed adjacent to the WB2A well to facilitate commingling of the product and to distribute the lift gas.
Talisman (Malaysia) Limited
BR-A Annexe
Braced Monopods
ICON Engineering provided the conceptual design & installation engineering, followed by the structural & geotechnical detailed design for the BR-A Annexe Monopods for Talisman Malaysia. The Annexe is braced back to the existing BR-A CPP.
By using the braced suction pile monopod concept, the design and installation was simplified and the cost was significantly lower than installing an adjacent stand alone structure.
Vermilion Energy
Wandoo B Wellbay Extension
Design and installation 2008
ICON Engineering reviewed the feasibility of a platform extension with tensioned conductors to provide another three conductor slots on the Wandoo B platform for Vermilion Energy. The module extension was designed to be installed in pieces limited by the platform crane capacity of approximately 8 tonnes at that radius.
