Selected Projects

            

Talisman (Malaysia) Limited
BR-A Annexe
Braced Monopods 

ICON Engineering provided the conceptual design & installation engineering, followed by the structural & geotechnical detailed design for the BR-A Annexe Monopods for Talisman Malaysia. The Annexe is braced back to the existing BR-A CPP.

By using the braced suction pile monopod concept, the design and installation was simplified and the cost was significantly lower than installing an adjacent stand alone structure.

 

            

Vermilion Energy
Wandoo B Wellbay Extension
Design and installation 2008

ICON Engineering reviewed the feasibility of a platform extension with tensioned conductors to provide another three conductor slots on the Wandoo B platform for Vermilion Energy. The module extension was designed to be installed in pieces limited by the platform crane capacity of approximately 8 tonnes at that radius.

            

Talisman Malaysia Limited
Bunga Kekwa C Annexe Platform
Conceptual Design and Installation

ICON Engineering undertook a conceptual review and recommended an annexe monopod platform braced back to the existing BKC wellhead platform as the most cost effective solution for Talisman to add new wells on the BKC platform. The design concept was able to be installed by drilling rig or derrick barge.

 

            

Santos (Sampang) Ltd
Oyong Field Development
Tall Template Structure

ICON Engineering was contracted by Santos to provide conceptual engineering, multi-discipline detailed design and installation engineering for the Oyong wellhead platform in Indonesia.

ICON developed a Tall Template Structure (TTS) and Short Template Structure (STS) for the jacket and topsides respectively.

 

            

Santos (Madura Offshore) Pty Ltd
Maleo Field Development
Minimal Wellhead Structure

ICON Engineering carried out conceptual engineering, multi-discipline detailed design and installation engineering for the Maleo wellhead platform for Santos in Indonesia. The platform is braced to a converted MODU production facility. As with the previous Oyong project ICON developed a TTS and STS for the jacket and topsides respectively.