Bearing Type Clamp
The Bearing Type clamp bolts around the conductor and bears on a pre-welded load ring or the underside of the wellhead. The clamp sits down on top of an insert bush.
ICON has delivered hundreds of Conductor Clamps to clients around the world.
The Bearing Type clamps are lower cost and do not require any special skills to install. The load ring is usually pre-attached to the upper conductor joint.
|ICON Bearing Type Conductor Gripper|
|Model||Conductor Diameter||Load Capacity||Dimension|
|Imperial (inches)||Metric (mm)||Tonnes||L x W x H (mm)|
|B36||36"||914||230||1260 x 1120 x 150|
|B30||30"||762||230||1108 x 968 x 150|
|B22||22"||559||230||905 x 770 x 150|
|B20||20"||508||227||854 x 546 x 150|
|B1338||13 3/8"||340||150||683 x 546 x 150|