Enquire now

Discuss your project requirements

So tell us...
What project is keeping you up at night?

ICON provides excellent engineering solutions. Complete this form and we'll get a problem solver on the case for you right away.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

WAPET (now Chevron)

Chevron Yammaderry and Cowle Joint Development Project: Installation, Hookup and Commissioning, Carnarvon Basin

The installation, hookup and commissioning work was undertaken by WAPET  using a team led by ICON's founding Directors. The  substructure was lifted from the transportation supply vessel horizontally and upended using the rig's draw works. The structures were installed into  foundation holes drilled using reverse circulation techniques. They were then grouted into place.

WAPET Yammaderry and Cowle

Installing the Yammaderry Cowle monopod wellhead platform

 

The Yammaderry and Cowle oil fields are located in block TP3 in the Carnarvon Basin offshore Western Australia. The combined field development consists of 2 monopod platforms and two pipelines exporting product to existing facilities on Thevenard Island.

ICON Director Garrick Aberle was WAPET's Project Manager for this project. The installation, hookup and commissioning work was undertaken by WAPET in-house using a team lead by current ICON directors

Fabrication, Transport & Installation

The 2 x 90 tonne substructures and 2 x 35 tonne topsides were fabricated in the Perth metropolitan area.  The substructures were transported from Perth to Geraldton by road and to site on the back deck of supply vessels.  The structures were installed using the "Maersk Valiant" Jackup Rig.

The substructure was lifted from the transportation supply vessel horizontally and upended using the rig's draw works. The structures were installed into foundation holes drilled using reverse circulation techniques. They were then grouted into place.

Yammaderry topsides install.jpeg

The monopod wellhead topsides being installed

 

Topsides Installation by Jackup Rig Hookup and Commissioning

It is essential to carefully determine the geometry and tolerances for positioning the rig, as there are tight clearances between the rig, the structure and the edge of the topsides on the transport vessel.

Yammaderry monopod wellhead platform.jpg

The completed Yammaderry Cowle monopod wellhead platform
return_to_top
© 2024 ICON Engineering
Powered by Kinetic.